Inserting The Breathing System - Dräger Perseus A500 Instructions For Use Manual

Assembly and preparation
Installing the flow sensors and ports
K
J
M
1 Insert the inspiratory flow sensor (J) and turn
the knurled nut clockwise to tighten the port
(K).
2 Insert the expiratory flow sensor (L), insert the
port (M) and turn the knurled nut clockwise to
tighten the port.
Attaching the CLIC adapter (optional)
CLIC adapter allows the following single-use CO
absorbers to be used:
– Infinity ID CLIC Absorber 800+
– CLIC Absorber 800+
– Infinity ID CLIC Absorber Free
– CLIC Absorber Free
56
L
 Attach the CLIC adapter.
Pay attention to the correct orientation of the
adapter: The two bypass symbols
align in a vertical line.

Inserting the breathing system

A
2
1 Insert the assembled breathing system (A)
vertically into the breathing system mount.
Instructions for use Perseus A500 SW 1.1n
N
(N) must