Before First Operation; Mounting On The Mounting Rails; Connecting The Mains Power Supply - Dräger Perseus A500 Instructions For Use Manual

Example of a permissible configuration:
Maximum Arm weight
length
400 mm
(15.7 in) (8.8 lbs)
300 mm
(11.8 in) (6.6 lbs)
P1= 400 mm * (4 kg + 5 kg) = 3600 mm*kg
(P1=15.7 in * (8.8 lbs + 11 lbs) = 310.9 in*lbs)
P2= 300 mm * (3 kg + 12 kg) = 4500 mm*kg
(P2= 11.8 in * (6.6 lbs + 26.5 lbs) = 390.6 in*lbs)
3600 mm*kg + 4500 mm*kg = 8100 mm*kg
(310.9 in*lbs + 390.6 in*lbs = 701.5 in*lbs)
8100 mm*kg < 8500 mm*kg
(701.5 in*lbs < 738 in*lbs)
If a combination of arms on one device side
exceeds the value of 8500 mm*kg (738 in*lbs),
tipping stability as per IEC 60601-1 is no longer
given. Check the tilting stability.

Before first operation

Connecting the mains power supply

The mains voltage must correspond to the voltage
range indicated by the rating plate on the rear of
the device.
Instructions for use Perseus A500 SW 1.1n
Weight of the
attached com-
ponent
4 kg 5 kg
(11 lbs)
3 kg 12 kg
(26.5 lbs)

Mounting on the mounting rails

Depending on the position of the mounting rail, the
following weights are permissible:
Position
On the side of the work-
ing surface
At the top on the rear of
the device
WARNING
Risk of tipping over
If the weight of the mounted accessories
exceeds the permissible maximum weight,
the medical device may tip over.
Observe the maximum weight per arm.
WARNING
Risk of tipping over
If the weight of the accessories is unevenly
distributed about the device, the medical
device may tip over.
Distribute the weight evenly.
WARNING
Risk of electric shock and device malfunction
If the device is connected to a power socket
with incorrect mains voltage or without a
protective ground, the user can be injured
and the device damaged.
Only connect the power cable to power
sockets with a protective ground, see
''Technical data''.
Assembly and preparation
Maximum weight
10 kg
(22 lbs)
2.5 kg
(5.5 lbs)
43