Symbols - Dräger Perseus A500 Instructions For Use Manual

Annex

Symbols

Symbol Explanation
Manufacturer
Date of manufacture
XXXX
Information on disposal
WEEE label, Directive
2002/96/EC
Consult instructions for use
Warning! Strictly follow these
instructions for use
Caution! Observe the accompa-
nying documentation! (symbol)
Attention! (safety sign)
Group Views...
Group Trends/Data...
Group Alarms...
Group System setup...
Group Start.../Standby...
Device on/Standby
Device switch On
Device switch Off
Patient categoryNeo
Patient categoryPed
256
Symbol Explanation
Patient categoryAdult
Temporarily suppress acoustic
alarm signal
Audio paused
Acoustic alarm signal is tempo-
rarily suppressed.
Alarm inactive
Alarm temporarily inactive
Mains power
Mains power unavailable
Battery completely charged
Battery empty
Central gas supply connected
and pressure within specified
range
Central gas supply not con-
nected or pressure not within
specified range
Gas cylinder full
Gas cylinder empty or gas cylin-
der valve turned off
Gas cylinder pressure sensor
not connected
Symbol for programmed
Auto On
Key for switching on and off and
dimming the workplace illumina-
tion
Instructions for use Perseus A500 SW 1.1n