Dräger Perseus A500 Instructions For Use Manual page 49

Connecting the gas cylinders on variants with
screw connections
B
D
A
C
1 Insert the compressed gas hoses into the strain
relief (A) and screw the strain relief tightly into
place.
2 Connect the compressed gas measurement
lines to the connections (B) through the gas
inlets.
3 Set the full gas cylinders (C) into the gas
cylinder holders and secure them with the
hook-and-loop straps.
CAUTION
Risk of damage to the device
When connecting the pressure reducers, ensure
that they do not protrude beyond the device.
Instructions for use Perseus A500 SW 1.1n
C
4 Tightly screw the pressure reducer (D) to the
gas cylinder valves. The connections must fit
each other directly; do not use transition
pieces.
Assembly and preparation
49