Emc Declaration; General Information - Dräger Perseus A500 Instructions For Use Manual

Anesthesia workstation
Hide thumbs Also See for Perseus A500:
Table of Contents

Advertisement

Pressure reducer for N
P
A
Q
P
2
P
3

EMC declaration

General information

The EMC conformity of the device has been
evaluated in conjunction with the external cables,
transducers, and accessories specified in the list of
accessories. Other accessories which do not affect
EMC conformity may be used if no other reasons
forbid their use (see other sections of these
instructions for use). The use of non-compliant
accessories may result in increased emissions or
decreased immunity of the medical device.
Instructions for use Perseus A500 SW 1.1n
O
2
Pressure [kPa x 100]
Flow [L/min]
Outlet pressure with pre-pressure P
Outlet pressure with pre-pressure P
= 60 kPa x 100 (870 psi)
V
= 11 kPa x 100 (160 psi)
V
The medical device must only be used adjacent to
or stacked with other devices when the
configuration is approved by Dräger. When use
adjacent to or stacked with other devices is
absolutely necessary without the configuration
being approved by Dräger, the correct operation of
the device in this configuration must be tested
before the product is used. In any case, strictly
observe the instructions for use of the other
devices.
Technical data
229

Advertisement

Table of Contents
loading

Table of Contents