Dräger Perseus A500 Instructions For Use Manual page 133

Vertical tab "Alarm config. 2"
Headline/
Parameter
Deactivate the alarm limit when activating MAN/SPON, CPAP, or
CPAP/PS with ∆Psupp < 5?
FiO high
2
etCO low
2
etCO high
2
inCO high
2
MV low
MV high
inAgent low
xMAC low
Deactivate the alarm limit in cardiac bypass mode (CBM)?
FiO high
2
MV low
MV high
inAgent low
Instructions for use Perseus A500 SW 1.1n
Setting range
Yes; No Yes; No
Yes; No
Yes; No
Yes; No
Yes; No
Yes; No
Yes; No
Yes; No
Yes; No
Yes; No
Yes; No
Yes; No
Description
The CPAP and CPAP / Pressure
Support modes are optional.
Yes; No Specifies the alarm behavior when
changing to a different ventilation
mode.
These settings apply only to a
change to a ventilation mode with
lower or no respiratory support
(see page 239).
The alarm behavior at the start of
the therapy is defined by the con-
figuration in the vertical tab Alarm
limits.
Specify alarm behavior in CBM
mode.
Configuration
133