Transferring Device Configurations; Resetting The Start Settings; Resetting The Consumption - Dräger Perseus A500 Instructions For Use Manual

Configuration
Vertical tab "Service"
Headline/
Parameter

Resetting the start settings

Certain tabs in the System setup dialog window
have a button for resetting the respective start
settings to the factory settings.
Resetting the changes in a dialog window
1 Open the corresponding tab.
2 Touch the Factory defaults button and
confirm.

Transferring device configurations

Configurations can be exported and imported with
the aid of a USB flash drive. Configurations from
one device version (electronically or mechanically
controlled gas mixer) can be transferred to other
Perseus devices of the same version in this way.
Prerequisite: The USB flash drive is connected to
the USB interface.
 Open System setup > Im/Export config. >
Im/Export config. (A).
144
Setting range

Resetting the consumption

The gas consumption can be reset in Standby >
System setup > System status > Consumption.
 Touch the Reset data button and confirm.
Description
A service password is required for
the following functions:
– To access the service menu
– To change the configuration
password
– To reset all settings for the
System setup dialog window to
the factory settings
Instructions for use Perseus A500 SW 1.1n