Device Outlets - Dräger Perseus A500 Instructions For Use Manual

Operation characteristic values (continued)
Drawer module (standard)
Drawer module (large)
Endotracheal suction with swivel arm and
accessories
Permissible total weight
Electromagnetic compatibility in compliance
with Directive 89/336/EEC
Protection classes
Device
Applied parts (connections for breathing
hoses)
Penetration of liquids
Classification in compliance with Directive
93/42/EEC, Annex IX
UMDNS Code Universal Medical Device
Nomenclature System - nomenclature system
for medical devices
GMDN Code Global Medical Device Nomencla-
ture - worldwide nomenclature for medical
devices
Use of latex

Device outlets

Serial ports
Protocol
Alarm delay time
Connector
Baud rate
Instructions for use Perseus A500 SW 1.1n
+ approximately 12 kg (26 lbs)
+ approximately 16 kg (35 lbs)
+ approximately 6 kg (13 lbs)
approx. 330 kg (728 lbs)
Tested in compliance with IEC 60601-1-2
I, in compliance with IEC 60601-1
TYPE BF
IP20 in compliance with IEC 60529,
fulfills IEC 60601-2-13
II b
10-134
37710
Perseus is not made with natural rubber latex.
COM 1 and COM 2;
Only connect devices that meet the require-
ments of IEC 60950-1 for ungrounded SELV cir-
cuits and the requirements of IEC 60601-1 (as
of the 2nd edition) for touchable secondary cir-
cuits with a maximum nominal voltage of 24
VDC.
MEDIBUS.X
Typically <2 s
9-way Sub-D
1200, 2400, 4800, 9600, 19200, 38400 baud
Technical data
221