Alpha Group OutBack Power MATE3 Owner's Manual page 76

Challenge Installer Password
This feature is not implemented at this time.
If the installer password is lost or forgotten, this process is used to reset access to the device. The screen
will generate a challenge code as shown below. Once the installer has the challenge code, it is necessary
to contact OutBack Technical Support (see inside front cover) to obtain a temporary installer password that
corresponds with the MATE3-generated challenge code. After entering the temporary installer password,
the installer should change the password according to their preferences.
Set User Access Level
To access the
1. Access the System Settings menu as shown in Figure 59.
2. Access the Change Installer Password menu as shown in Figure 67.
3. Use the control wheel to adjust each of the four set points.
Press the button in the center of the control wheel to accept the selection.
4. After setting the parameters for each set point, press the TOP navigation key to return to the
Main Menu screen.
Set Points:
 Set points include four numerical digits from 0-9.
74
Menu:
Figure 70 Challenge Installer Password
Inverter Settings
900-0117-01-00 Rev A