Alpha Group OutBack Power MATE3 Owner's Manual page 126

Set Generator Total Run Time
The total running time for an automatic generator is displayed on the Generator Status screen, which is
accessed with the Gen hot key. (See page 52.) This menu allows the timer to be set to a different figure,
or to be reset to zero.
Set Total Generator Run Time
To adjust the
1. Access the MATE menu as shown in Figure 113.
2. Use the control wheel to select the Advanced Generator Start menu option.
Press the button in the center of the control wheel to accept the selection.
3. Use the control wheel to highlight Set Tota Generator Run Time screen.
Press the button in the center of the control wheel to select the menu item.
4. Use the control wheel to increase or decrease the Generator Total Run
Press the button in the center of the control wheel to select the set point. Once set, the timer on the
Generator Status screen will proceed from this time.
5. Use the <Reset> soft key to reset the timer to zero.
6. Press the TOP navigation key to return to the Main Menu screen.
Set points:
 Generator Total Run Time:
0.0 – 999.9
Figure 123
124
screen:
MATE/AGS/Set Generator Total Run Time
MATE3 Settings
Time.
900-0117-01-00 Rev A