Important Safety Instructions; Symbols Used; Audience; Definitions - Alpha Group OutBack Power MATE3 Owner's Manual

Important Safety Instructions

READ AND SAVE THESE INSTRUCTIONS!
This manual contains important safety instructions for the MATE3 System Display and Control. Read all
instructions and cautionary markings on the MATE3 and on any accessories or additional equipment
included in the installation. Failure to adhere to these instructions could result in severe shock or possible
electrocution. Exercise extreme caution at all times to prevent accidents.

Symbols Used

Audience

This manual is intended for use by anyone required to install and operate this equipment. Be sure to
review this manual carefully to identify any potential safety risks before proceeding. Familiarize yourself
with all the features and functions of this equipment before proceeding. Failure to install or use this
equipment as instructed in this manual can result in damage to the equipment that may not be covered
under the limited warranty.

Definitions

The following is a list of initials, terms, and definitions used in conjunction with this product.
Term Definition
AC Alternating Current; refers to voltage produced by the inverter, utility grid, or generator
AGS Advanced Generator Start
AUX Auxiliary 12-volt output or switched relay for inverter, charge controller, or battery
monitor.
Battery Monitor See FNDC.
900-0117-01-00 Rev A
WARNING: Hazard to Human Life
This type of notation indicates that the hazard could be harmful to human life.
CAUTION: Hazard to Equipment
This type of notation indicates that the hazard may cause damage to
the equipment.
IMPORTANT:
This type of notation indicates that the information provided is important to
the installation, operation, and/or maintenance of the equipment. Failure to
follow the recommendations in such a notation could result in voiding the
equipment warranty.
Table 1 Terms and Definitions
1