Sound
The Sound menu item allows the user to enable, or disable, sounds when a button is pushed or the control
wheel is used.
Sound
To access the
menu:
1. Access the System Settings menu as shown in Figure 59.
2. Use the control wheel to highlight the Sound menu.
Press the button in the center of the control wheel to accept the selection.
3. Use the control wheel to change the value of each set point.
Press the button in the center of the control wheel to accept the selection.
The selection should automatically advance to the next set point when the button is pushed.
Repeat for each set point.
4. After setting the parameters for each set point, press the TOP navigation key to return to the System
Configuration screen.
Set Points:
Button Beep = Enabled or Disabled
Wheel Click = Enabled or Disabled
900-0117-01-00 Rev A
Figure 63
Sound
Inverter Settings
67
Need help?
Do you have a question about the OutBack Power MATE3 and is the answer not in the manual?