1GP71_0E
HP8360 emulation mode
Status
Command / Function / Remark / Limitation
FREQuency:STARt value
Set / Query the rf start frequency (in sweep mode).
Value:
num [HZ | KHZ | MHZ | GHZ] | UP | DOWN | MAXimum | MINimum
Fmin _ num _ Fmax
Default:
Fmin
Remark:
UP, DOWN, MAXimum, MINimum are not supported.
FREQuency:STEP:AUTO value
FREQuency:STEP[:INCRement] value
Set / Query the rf frequency step size.
Value:
num [HZ | KHZ | MHZ | GHZ] | MAXimum | MINimum
0.0 Hz _ num _ Fmax
Default:
---
Remark:
MAXimum, MINimum are not supported.
FREQuency:STOP value
Set / Query the rf stop frequency (in sweep mode).
Value:
num [HZ | KHZ | MHZ | GHZ] | UP | DOWN | MAXimum | MINimum
Fmin _ num _ Fmax
Default:
Fmax
Remark:
UP, DOWN, MAXimum, MINimum are not supported.
•
INITiate Subsystem
Status
Command / Function / Remark / Limitation
INITiate:CONTinuous value
INITiate[:IMMediate]
•
LIST Subsystem
Status
Command / Function / Remark / Limitation
LIST:DWELl value
Table 75: Frequency subsystem
Table 76: Initiate subsystem
86
Rohde & Schwarz