1GP71_0E
HP8373 emulation mode
Status
Command / Function / Remark / Limitation
OUTPut:PROTection[:STATe] value
OUTPut[:STATe] value
Set / Query the (activation) state of the rf output.
Value:
ON | OFF | 1 | 0
Default:
ON
[SOURce[1]:]POWer:ATTenuation:AUTO value
[SOURce[1]:]POWer:PROTection:STATe value
•
Status register control
Status
Command / Function / Remark / Limitation
STATus:OPERation:CONDition?
Query the condition bits of the operation status register.
Value:
0 ... 32757
STATus:OPERation:ENABle value
Set / Query the enable bits of the operation status register.
Value:
0 ... 32757
Default:
0
STATus:OPERation[:EVENt]?
Query the event bits of the operation status register.
Value:
0 ... 32757
STATus:OPERation:NTRansition value
Set / Query the negative transition filter bits of the operation status register.
Value:
0 ... 32757
Default:
0
STATus:OPERation:PTRansition value
Set / Query the positive transition filter bits of the operation status register.
Value:
0 ... 32757
Default:
32757
Table 102: RF output control commands
107
Rohde & Schwarz