Table of Contents
Advertisement
1GP71_0E
HP8643 emulation mode
While this is insignificant in pure remote-control operation, it can lead to
inconsistencies and undesirable effects or malfunctions when you use
both manual and remote control in this language emulation mode.
GPIB functions
The following table shows the GPIB functions, supported by the HP8643.
Status
Function
DCL
GTL
IFC
LLO
PPC
PPU
REN
SDC
SPD
SPE
SRQ
Commands
The following table shows the commands, supported by the HP8643.
•
Common
Status
Command / Function / Remark / Limitation
*CAL?
Query the instruments calibration state.
*CLS
Clear the status register.
*ESE value
Set / Query the bits of the extended status enable register.
*ESR?
Query the bits of the extended status register.
*IDN?
Query the ID string.
*OPC
*OPC?
Wait / Query for completion of command.
Function / Remark / Limitation
Device clear.
Goto local mode.
Interface clear.
Local lockout.
Parallel-Poll configure.
Parallel-Poll unconfigure.
Goto remote mode.
Selective device clear.
Serial-Poll disable.
Serial Poll enable.
Request service.
Table 104: GPIB functions
111
Rohde & Schwarz
Advertisement
Table of Contents
