R&S SMA100A Application Notes page 46

AN680XX emulation mode
Status Command / Function / Remark / Limitation
[:SOURce:]FREQuency:SPAN value
Set / Query the frequency span for the sweep mode SWEep[1].
Value:
1KHZ ... (freqmax - freqmin) [HZ | KHZ | MHZ | GHZ]
Default:
freqmax – freqmin
[:SOURce:]FREQuency:SPAN:FULL
Set the frequency span for the sweep mode SWEep[1] to freqmax – freqmin.
[:SOURce:]FREQuency:SPAN2 value
[:SOURce:]FREQuency:SPAN2:FULL
[:SOURce:]FREQuency:STARt value
Set / Query the start frequency for the sweep mode SWEep[1].
Value:
freqmin ... freqmax [HZ | KHZ | MHZ | GHZ] | MIN
Default:
Freqmin
[:SOURce:]FREQuency:STARt2 value
[:SOURce:]FREQuency:STOP value
Set / Query the stop frequency for the sweep mode SWEep[1].
Value:
freqmin ... freqmax [HZ | KHZ | MHZ | GHZ] | MAX
Default:
freqmax
[:SOURce:]FREQuency:STOP2 value
[:SOURce:]LIST<n>:CALCulate
[:SOURce:]LIST<n>:DWELl value
[:SOURce:]LIST<n>:FREQuency value
[:SOURce:]LIST<n>:FREQuency:POINts value
[:SOURce:]LIST<n>:INDex value
[:SOURce:]LIST<n>:POWer value
[:SOURce:]LIST<n>:POWer:POINts value
[:SOURce:]LIST<n>:STARt value
[:SOURce:]LIST<n>:STOP value
[:SOURce:]MARKer<n>:AOFF
Turn off all markers.
1GP71_0E 46 Rohde & Schwarz