Table of Contents
Advertisement
RC3102 emulation mode
value in HZ | KZ | MZ | GZ
Default:
0.0 KZ
MF0
Turn frequency modulation off.
MF1
Turn frequency modulation on.
Remark:
FM can be combined with AM and PM, but NOT with HM.
MF2
Select internal 400 Hz sine wave as modulations source.
MF3
Select internal 1000 Hz sine wave as modulations source.
MF4
Select external modulation source in AC coupling mode.
MF5
Select external modulation source in DC coupling mode.
HM value
Select phase modulation function, optionally set modulation deviation.
Value:
value in RAD
Default:
0.0 RAD
MH0
Turn phase modulation off.
MH1
Turn phase modulation on.
Remark:
HM can be combined with AM and PM, but NOT with FM.
MH2
Select internal 400 Hz sine wave as modulations source.
MH3
Select internal 1000 Hz sine wave as modulations source.
MH4
Select external modulation source in AC coupling mode.
MH5
Select external modulation source in DC coupling mode.
Remark:
This command has been added for compatibility to the other modulations modes.
The command is NOT supported on the RC3102.
Table 163: Modulation commands
1GP71_0E
169
Rohde & Schwarz
Advertisement
Table of Contents
