Table of Contents
Advertisement
HP8340 emulation mode
Output next bandcross frequency.
Remarks:
In frequency sweep mode, next bandcross frequency is always set to stop
frequency.
OC
Output coupled parameters.
OD
Output diagnostics.
OF
Output faults.
Remarks:
HP8340 responds with actual state of the instruments hardware.
SM* always responds "0000" due to the difference in hardware implementation.
OI
Output firmware id.
Remarks:
SM* responds "08340BREV 01 Aug 86".
OK
Output last lock frequency.
OP
Output interrogated parameter.
OR
Output power level.
NA value
Configure network analyzer.
Value:
0x00 ... 0xFF
Default:
0
Remarks:
Command is sent by the HP8757 Analyzer during initialisation phase.
BC
Advance manual band cross.
Remarks:
Command is sent by the HP8757 Analyzer during initialisation phase and
measurement phase.
KR
Release keyboard.
SW0
Swap channels.
SW1
Swap channels.
EK
Enable KNOB at frontpanel
1GP71_0E
69
Rohde & Schwarz
Advertisement
Table of Contents
