1GP71_0E
HP8360 emulation mode
Status
Command / Function / Remark / Limitation
DISPlay[:STATe] value
•
FM Subsystem
Status
Command / Function / Remark / Limitation
FM:COUPling value
FM[:DEViation] value
Set / Query the modulation deviation.
Value:
num [HZ | KHZ | MHZ | GHZ] | MAXimum | MINimum
0.0 Hz _ num _ ??? Hz
Default:
1.0 MHz
Remark:
MAXimum, MINimum is not supported..
FM:FILTer:HPASs value
FM:INTernal:FREQuency value
Set / Query the modulation rate.
Value:
num [HZ | KHZ | MHZ | GHZ] | MAXimum | MINimum
Fmin _ num _ Fmax
Default:
1.0 MHz
Remark:
MAXimum, MINimum is not supported.
FM:INTernal:FUNCtion value
FM:SENSitivity value
FM:SOURce value
Select / Query the signal source of the modulation.
Value:
INTernal | EXTernal
Default:
EXTernal
Remark:
INTernal, EXTernal are not supported
LF1 corresponds to INTernal
EXT1 corresponds to EXTernal
Table 73: Display subsystem
83
Rohde & Schwarz