1GP71_0E
HP8648 emulation mode
GPIB functions
The following table shows the GPIB functions, supported by the HP8648.
Status
Function
DCL
GTL
IFC
LLO
PPC
PPU
REN
SDC
SPD
SPE
SRQ
Commands
The following table shows the commands, supported by the HP8648
•
Common
Status
Command / Function / Remark / Limitation
*CLS
Clear the status register.
*ESE value
Set / Query the bits of the extended status enable register.
*ESR?
Query the bits of the extended status register.
*IDN?
Query the ID string.
Remark:
ID string has to be provided in frontpanel.
*OPC
*OPC?
*RCL value
Recall an instrument setup.
*RST
Reset the instrument to a default state.
Function / Remark / Limitation
Device clear.
Goto local mode.
Interface clear.
Local lockout.
Parallel-Poll configure.
Parallel-Poll unconfigure.
Goto remote mode.
Selective device clear.
Serial-Poll disable.
Serial Poll enable.
Request service.
Table 128: GPIB functions
133
Rohde & Schwarz