R&S SMA100A Application Notes page 85

HP8360 emulation mode
Status Command / Function / Remark / Limitation
FREQuency:MODE value
Set / Query the frequency operation mode.
Value:
FIXed | CW | SWEep | LIST
Default:
CW
Remark:
LIST is not supported
FREQuency:MULTiplier value
Set / Query the rf frequency multiplier (for the frontpanel display).
Value:
num | MAXimum | MINimum
0.001 _ num _ 10000
Default:
1.0
Remark:
MAXimum, MINimum is not supported.
FREQuency:MULTiplier:STATe value
FREQuency:OFFSet value
Set / Query the rf frequency offset (for the frontpanel display).
Value:
num [HZ | KHZ | MHZ | GHZ] | MAXimum | MINimum
-50 GHz _ num _ +50GHz
Default:
0.0 Hz
Remark:
MAXimum, MINimum is not supported.
FREQuency:OFFSet:STATe value
FREQuency:SPAN value
Set / Query the rf frequency span (in sweep mode).
Value:
num [HZ | KHZ | MHZ | GHZ] | UP | DOWN | MAXimum | MINimum
0.0 Hz _ num _ Fmax
Default:
0.0 Hz
Remark:
UP, DOWN, MAXimum, MINimum are not supported.
1GP71_0E 85 Rohde & Schwarz