Table of Contents
Advertisement
1GP71_0E
HP8643 emulation mode
Status
Command / Function / Remark / Limitation
LFSource:WAVeform value
Set / Query to lf generator waveform.
Value:
SAWTooth | SINe | SQUare | WGNoise | TRIangle
Default:
SINe
Remark:
SAWTooth, WGNoise is not supported.
LFSource:TRIGger[:IMMediate]
LFSource:TRIGger:SOURce value
Table 113: LFSource subsystem commands
•
MARKer Subsystem
Status
Command / Function / Remark / Limitation
MARKer[1 | 2][:FREQuency] value
Set / Query the marker frequency.
Value:
value [HZ | KHZ | MHZ | MAHZ | GHZ] | UP | DOWN | MINimum | MAXimum
Default:
freqmin
Remark:
Marker signals at auxiliary i/o ports are not supported so far.
MARKer[1 | 2][:FREQuency]:STEP[:INCRement] value
Alias to FREQuency[:CW]:STEP[:INCRement] value
Remark:
Marker signals at auxiliary i/o ports are not supported so far.
MARKer[1 | 2]:STATe value
Set / Query the marker (activation) state.
Value:
ON | OFF | 1 | 0
Default:
OFF
Remark:
Marker signals at auxiliary i/o ports are not supported so far.
MARKer[1 | 2]:AOFF
Set all markers off.
Remark:
Marker signals at auxiliary i/o ports are not supported so far.
Table 114: MARKer subsystem commands
122
Rohde & Schwarz
Advertisement
Table of Contents
