Table of Contents
Advertisement
HP8643 emulation mode
•
FM Subsystem
Status
Command / Function / Remark / Limitation
[SOURce:]FM[:DEViation] value
Set / Query the rf carrier modulation deviation.
Value:
value [HZ | KHZ | MHZ | MAHZ | GHZ] | UP | DOWN | MINimum | MAXimum
Default:
1 KHZ
[SOURce:]FM[:DEViation]:STEP[:INCRement] value
Set / Query the rf carrier modulation deviation step size.
Value:
value [HZ | KHZ | MHZ | MAHZ | GHZ] | MINimum | MAXimum
Default:
1 KHZ
[SOURce:]FM:STATe value
Set / Query the (activation) state of the modulation.
Value:
ON | OFF | 1 | 0
Default:
OFF
[SOURce:]FM:SOURce value
Set / Query the source of the modulation signal.
Value:
INTernal, EXTernal | EXTernal, INTernal
Default:
INTernal
[SOURce:]FM:COUPling value
Select / Query the coupling type, when modulation signal source is set to external.
Value:
AC | DC | GROund
Default:
DC
Remark:
GROund is not supported.
[SOURce:]FM:MODE value
[SOURce:]FM:FREQuency value
Alias to LFSource:FREQuency value.
[SOURce:]FM:FREQuency:STEP[:INCRement] value
Alias to LFSource:FREQuency:STEP[:INCRement] value.
[SOURce:]FM:DELay value
1GP71_0E
117
Rohde & Schwarz
Advertisement
Table of Contents
