Activation; Local - R&S SMA100A Application Notes

4 Activation

1GP71_0E
Activation
In order to use a specific language emulation mode of the SM*, it must first be
activated by the user.
Activation is done either
locally using the front panel, or,
o
remotely using SCPI commands
o

Local

In the Remote Channel Settings dialog from the Setup GPIB menu, select the
appropriate Language in GPIB Settings, e.g., HP8340. When done, exit the
dialog by pressing ESC or clicking the close icon.
Figure 1: Activating an emulation mode on, e.g., SMF100
12 Rohde & Schwarz