R&S SMA100A Application Notes page 125

HP8643 emulation mode
Status Command / Function / Remark / Limitation
PULSe:CONDitioning value
PULSe:DELay value
Set / Query the pulse delay.
Value:
value [S | MS | US | NS] | UP | DOWN | MINimum | MAXimum
Default:
1.0 US
PULSe:DELay:STEP[:INCRement] value
Set / Query the pulse delay step size.
Value:
value [S | MS | US | NS] | MINimum | MAXimum
Default:
1.0 US
PULSe:FREQuency value
Alias to LFSource:FREQuency value.
PULSe:FREQuency:STEP[:INCRement] value
Alias to LFSource:FREQuency:STEP[:INCRement] value.
PULSe:IMPedance value
PULSe:SLOPe value
Set / Query the trigger edge.
Value:
POSitive | NEGative | BOTH
Default:
POSitive
Remark:
BOTH is not supported.
PULSe:SOURce value
Set / Query the source of the modulation signal.
Value:
INTernal, EXTernal | EXTernal, INTernal
Default:
INTernal
PULSe:WIDTh value
Set / Query the pulse width.
Value:
value [S | MS | US | NS] | UP | DOWN | MINimum | MAXimum
Default:
1.0 US
1GP71_0E 125 Rohde & Schwarz