Hp8360 Emulation Mode; General; Gpib Functions; Commands - R&S SMA100A Application Notes

8 HP8360 emulation mode

1GP71_0E
HP8360 emulation mode

General

In this language emulation mode, the emulation software in the SM* emulates
the SCPI-compatible language, implemented in Agilents's signal generators of
type
HP83620A / B
o
HP83630A / B
o
The emulation software is supported on signal generators of type
SMF100
o
The signal generator HP83620 / HP83630 also supports a HP8340
compatible Pre-SCPI-language. For more information on that language,
please refer to the HP8340 emulation.
The emulation software simulates the HP8360 data model in the execution unit
and transfers most of the HP8360 parameters into the SM* database.
SM*
remote control
interface
SM*
frontpanel
Those HP8360 functions and parameters, having no direct equivalent SM*
function and parameter, are not supported by this emulation so far.

GPIB functions

Commands

The following table shows the commands, supported by the HP8360.
Figure 5: HP8360 emulation model
78
SM*
hardware
SM*
database
Rohde & Schwarz