1GP71_0E
AN680XX emulation mode
Status
Command / Function / Remark / Limitation
*RCL value
Recall an instrument setup.
Value:
0 ... 9
*RST
Reset the instrument to a default state.
*SAV value
Save an instrument setup.
Value:
0 ... 9
*SRE value
Set / Query the bits of the status enable register.
*STB?
Query the bits of the status register.
*TRG
Trigger an action.
*TST?
Execute the instruments self test
*WAI
Wait until al commands are completed.
•
ABORt Subsystem
Status
Command / Function / Remark / Limitation
ABORt
•
CONTrol Subsystem
Status
Command / Function / Remark / Limitation
CONTrol:BLANking:POLarity value
CONTrol:PENLlift:POLarity value
CONTrol:RAMP[:STATe] value
CONTrol:RAMP:REST value
CONTrol:RAMP:TIME value
•
DIAGnostic Subsystem
Status
Command / Function / Remark / Limitation
Table 36: Common commands
Table 37: ABORT subsystem
Table 38: CONTROL subsystem
43
Rohde & Schwarz