Table of Contents
Advertisement
HP8340 emulation mode
freqmin ... freqmax HZ | KZ | MZ | GZ
Default:
0.5 * (freqmin + freqmax)
Remark:
Acts like CW[value]
Frontpanel knob and step keys are not linked to cw frequency and cw frequency
resolution.
Commands RB[value] and UP/DN are not linked to cw frequency and cw frequency
resolution.
Table 52: Swept / CW Frequency Selection commands
•
Frequency Markers
Status
Command / Function / Remark / Limitation
M1[value]
Turn on marker 1, optionally set marker frequency.
Value:
freqmin ... freqmax HZ | KZ | MZ | GZ
Default:
0.5 * (freqmin + freqmax)
Remark:
There is no signal output on auxiliary i/o.
M2[value]
Turn on marker 2, optionally set marker frequency.
Value:
freqmin ... freqmax HZ | KZ | MZ | GZ
Default:
0.5 * (freqmin + freqmax)
Remark:
There is no signal output on auxiliary i/o.
M3[value]
Turn on marker 3, optionally set marker frequency.
Value:
freqmin ... freqmax HZ | KZ | MZ | GZ
Default:
0.5 * (freqmin + freqmax)
Remark:
There is no signal output on auxiliary i/o.
M4[value]
Turn on marker 4, optionally set marker frequency.
Value:
freqmin ... freqmax HZ | KZ | MZ | GZ
Default:
0.5 * (freqmin + freqmax)
1GP71_0E
60
Rohde & Schwarz
Advertisement
Table of Contents
