Table of Contents
Advertisement
HP8340 emulation mode
0 DB
PS1 value
Turn on power sweep mode, optionally sets power span.
PS0
Turn off power sweep mode.
SL1
Turn on power slope mode
SL0
Turn off power slope mode
RF1
Set output power on.
RF0
Set output power off.
RP1
Turn on peak output power.
RP0
Turn off peak output power.
SHAK
Peak instantaneous.
SHRP
Select calibration tracking mode.
A1
Select internal leveling mode.
A2
Select external (crystal) leveling mode.
A3
Select external (power meter) leveling mode.
SHA3
Disable ALC to control modulator drive directly.
SHPS
Decouple ALC and attenuator, control each independently.
SHSL
Control step attenuator independently.
AT
Control step attenuator independently.
Table 58: Power Level and Control commands
•
Diagnostic
Status
Command / Function / Remark / Limitation
SHM1
Display M/N and 20/30 loop frequencies.
1GP71_0E
66
Rohde & Schwarz
Advertisement
Table of Contents
