Table of Contents
Advertisement
HP8643 emulation mode
Status
Command / Function / Remark / Limitation
{AMPLitude | POWer}[:OUT][:LEVel]:STEP:UNIT value
Set / Query the rf carrier's power level step unit.
Value:
DB | V
Default:
DB
{AMPLitude | POWer}[:OUT]:ALC:BANDwidth:AUTO value
{AMPLitude | POWer}[:OUT]:ATTenuation value
Set / Query the output attenuator.
Value:
value DB
Default:
0.0 DB / AUTO ON
{AMPLitude | POWer}[:OUT]:ATTenuation:AUTO value
Set / Query the (activation) state of the automatic output.
Value:
ON | OFF | 1 | 0
Default:
ON
{AMPLitude | POWer}[:OUT]:ATTenuation:STEP[:INCRement]?
{AMPLitude | POWer}[:OUT]:GAIN value
Set / Query the rf carrier's gain (offset).
Value:
value [DB] | MINimum | MAXimum
Default:
0.0 DB
{AMPLitude | POWer}[:OUT]:MUTing value
{AMPLitude | POWer}[:OUT]:STATe value
Set / Query the (activation) state of automatic attenuation mode.
Value:
ON | OFF | 1 | 0
Default:
OFF
{AMPLitude | POWer}[:OUT]:ULIMit value
{AMPLitude | POWer}[:OUT]:UNIT value
Set / Query the rf carrier's power level unit.
Value:
DBM | DBMW | DBUV | V
Default:
DBM
1GP71_0E
114
Rohde & Schwarz
Advertisement
Table of Contents
