R&S SMA100A Application Notes page 121

HP8643 emulation mode
Status Command / Function / Remark / Limitation
LFSource:FM:PHASe[:ADJust]:STEP[:INCRement] value
LFSource:FM:STATe value
LFSource:FM:WAVeform value
LFSource:LEVel value
Set / Query the lf generator level.
Value:
value [V | MV | UV] | MINimum | MAXimum
Default:
1.0 V
LFSource:LEVel:STEP[:INCRement] value
Set / Query the lf generator level step size.
Value:
value [V | MV | UV] | MINimum | MAXimum
Default:
0.1V
LFSource:PM[:DEViation] value
LFSource:PM[:DEViation]:STEP[:INCRement] value
LFSource:PM:FREQuency value
LFSource:PM:FREQuency:STEP[:INCRement] value
LFSource:PM:PHASe[:ADJust] value
LFSource:PM:PHASe[:ADJust]:STEP[:INCRement] value
LFSource:PM:STATe value
LFSource:PM:WAVeform value
LFSource:PULSe:FREQuency value
LFSource:PULSe:FREQuency:STEP[:INCRement] value
LFSource:PULSe:PHASe[:ADJust] value
LFSource:PULSe:PHASe[:ADJust]:STEP[:INCRement] value
LFSource:PULSe:STATe value
LFSource:STATe value
Set / Query the (activation) state of the lf generator.
Value:
ON | OFF | 1 | 0
Default:
OFF
1GP71_0E 121 Rohde & Schwarz