Step Size, Display And Entry Control - R&S SMA100A Application Notes

HP8340 emulation mode
Modulation source is external signal at connector EXT2.
FM0
Turn frequency modulation off.
Table 55: Modulation commands
•

Step Size, Display and Entry Control

Status Command / Function / Remark / Limitation
SF value
Select and optionally set frequency step size.
SHCF value
Select and optionally set frequency step size.
SP value
Select and optionally set power step size.
SHPL value
Select and optionally set power step size.
UP
Increment active parameter.
DN
Decrement active parameter.
DU1
Reenable numeric display update.
SHS11
Reenable numeric display update.
DU0
Disable numeric display update.
SHS10
Disable numeric display update.
SHT21
Enable penlift at bandcrossing.
SHT20
Disable penlift at bandcrossing.
AU
Switch from fixed function to coupled mode.
EF
Disable active function and switch (numeric) entry off.
SHFA<value>
Select and optionally set frequency multiplications factor.
SHFB<value>
Select and optionally set frequency offset.
Table 56: Step Size, Display and Entry Control commands
1GP71_0E 64 Rohde & Schwarz