Table of Contents
Advertisement
1GP71_0E
HP8373 emulation mode
Status
Command / Function / Remark / Limitation
[SOURce[1]:]POWer[:LEVel][:IMMediate][:AMPLitude] value
Set / Query the output power level.
Value:
Pmin ... Pmax in [] | UP | DOWN | MINimum | MAXimum | DEFault
Default:
-110.0 DBM
Remark:
UP, DOWN, MINimum, MAXimum, DEFault are not supported.
[SOURce[1]:]POWer[:LEVel][:IMMediate][:AMPLitude]:STEP[:INCRement] value
Set / Query the output power level step size.
Value:
0.01 ... 150.0 [DB] | | MINimum | MAXimum | DEFault
Default:
1.0 DB
Remark:
MINimum, MAXimum, DEFault are not supported.
•
Programmable Interface
Status
Command / Function / Remark / Limitation
SYSTem:COMMunicate:GPIB:ADDRess value
Set / Query the GPIB address of the instrument.
Value:
00 ... 30 | MINimum | MAXimum
Remark:
MINimum, MAXimum are not supported.
SYSTem:LANGuage value
Set / Query the programming language.
Value:
"SCPI" | "COMP=8673" | "COMPATIBILITY=8673"
Remark:
"SCPI" returns to the native SM* SCPI language
"COMP=8673", "COMPATIBILITY=8673" are not supported
UNIT:FREQuency value
UNIT{:POWer|:VOLTAGE} value
UNIT:TIME value
Table 101: Programmable Interface commands
•
RF output control
Status
Command / Function / Remark / Limitation
Table 100: Power level commands
106
Rohde & Schwarz
Advertisement
Table of Contents
