Table of Contents
Advertisement
HP8373 emulation mode
Status
Command / Function / Remark / Limitation
[SOURce[1]:]FM[:DEViation] value
Set / Query the modulation deviation.
Value:
0.0 ... 10MHz in [HZ | KHZ | MHZ] | UP | DOWN | MINimum | MAXimum | DEFault
Default:
1.0 MHZ
Remark:
UP, DOWN, MINimum, MAXimum, DEFault are not supported.
[SOURce[1]:]FM[:DEViation]:STEP[:INCRement] value
[SOURce[1]:]FM:INTernal:FREQuency value
Set / Query the modulation rate.
Value:
1.0 KHz ... 1.0 MHz in [HZ | KHZ] | UP | DOWN | MINimum | MAXimum | DEFault
Default:
100.0 KHz
Remark:
LF Generator 1 is used
UP, DOWN, MINimum, MAXimum, DEFault are not supported.
[SOURce[1]:]FM:INTernal:FREQuency:STEP[:INCRement] value
[SOURce[1]:]FM:INTernal:FUNCtion value
[SOURce[1]:]FM:SENSitivity value
[SOURce[1]:]FM:SOURce value
Select / Query the signal source of the modulation.
Value:
INTernal | FEED | EXTernal
Default:
EXTernal
Remark:
INTernal, FEED, EXTernal are not supported
LF1 corresponds to INTernal
EXT1 corresponds to EXTernal
[SOURce[1]:]FM:STATe value
Set / Query the (activation) state of the modulation.
Value:
ON | OFF | 1 | 0
Default:
OFF
[SOURce[1]:]MODulation:AOFF
[SOURce[1]:]MODulation:OVDR
1GP71_0E
103
Rohde & Schwarz
Advertisement
Table of Contents
