R&S SMA100A Application Notes page 18

AF2040 emulation mode
Status Command / Function / Remark / Limitation
RFLV:INC value
Set RF level step.
Value:
num [DB]
Default:
1.0 DB
RFLV:UP
Set RF output level one step up.
RFLV:DN
Set RF output level one step down.
RFLV:RETN
Return to original setting.
RFLV:XFER
Treat current setting to be the new original setting.
RFLV:ON
Turn RF output on.
RFLV:OFF
Turn RF output off.
RFLV:TYPE value
Select voltage related unit.
Value:
EMF | PD
Default:
PD
RFLV:UNITS value
Select default RF output level unit.
Value:
DBM | DBV | DVMV | DBUV | V | MV | UV
Default:
DBM
RFLV:OFFS:VALUE value
Set offset of current band.
Value:
num [DB]
Default:
0.0 DB
RFLV:OFFS:ON
Turn offset of current band on.
RFLV:OFFS:OFF
Turn offset of current band off.
RFLV:OFFS:ENABLE
Enable offset value.
1GP71_0E 18 Rohde & Schwarz