Table of Contents
Advertisement
1GP71_0E
HP8648 emulation mode
•
POWer Subsystem
Status
Command / Function / Remark / Limitation
[:SOURce:]POWer[:LEVel][:IMMediate][:AMPLitude] value
Set / Query the power level of the RF output.
Value:
Pmin ... Pmax
Default:
-136.0 DBM
[:SOURce:]POWer:ATTenuation:AUTO value
Set / Query the coupling of the attenuation to the amplitude level control circuit.
Value:
ON | OFF | 1 | 0
Default:
ON
[:SOURce:]POWer:REFerence value
Set / Query the output reference level.
Value:
Pmin ... Pmax
Default:
0 DBM
[:SOURce:]POWer:REFerence:STATe value
Set / Query the (activation) state of the output reference level
Value:
ON | OFF | 1 | 0
Default:
OFF
•
PULM Subsystem
Status
Command / Function / Remark / Limitation
[SOURce:]PULM:STATe value
Set / Query the (activation) state of the modulation.
Value:
ON | OFF | 1 | 0
Default:
OFF
•
STATus Subsystem
Status
Command / Function / Remark / Limitation
STATus:QUEStionalbe[:EVENt]?
Query the event bits of the questionable status register.
Table 136: POWER subsystem
Table 137: PULM subsystem
139
Rohde & Schwarz
Advertisement
Table of Contents
