Transport And Parking Position - Brainlab Curve Dual Navigation Station System User's Manual

TRANSPORT
7.2.2

Transport and Parking Position

Warning Label
The warning label illustrates the correct parking and transport position for Camera Cart when
docked to the Monitor Cart.
Ensure that the monitors are locked in place in the position indicated on the warning label.
Precautions
Only transport the Camera Cart in transport position. It is possible for the extended cantilever arm
to unexpectedly swing outward when movement stops.
Be careful when using the handle on the post to rotate the camera arm as the arm has a wide
radius, which could allow the camera to come in contact with equipment or people.
If Camera Cart is not in the proper transport position while moving, an abrupt stop may
cause the camera arm to oscillate.
Ensure that the arms of the Camera and Monitor Carts do not hit people or surroundings
while it is being moved or adjusted.
How to Position Monitor Cart
Steps
1.
System User Guide Rev. 1.0 Curve Dual Navigation Station Ver. 1.2
Figure 55
Rotate the (lowest) arm in the direction indicated on the park-
ing label until the label lines up with the corresponding label
on the Monitor Cart post.
NOTE: Be aware that there is a fixation that causes the upper
arm to move when the angle between both arms is 90°.
111