Preset List; Preset List Controls - Extron electronics VNM EC 200 User Manual

Preset List

The Preset List panel (see
and control of the system presets from the preset list toolbar and provides a way to quickly
reconfigure devices.
System presets configure and connect groups of VN-Matrix devices for a specific task.
They are built using devices in the Matrix Devices list (
Design workspace (
time.
Each preset can contain a mix of matrix devices that includes encoders, decoders, codecs,
and recorders. Controls to manage presets are provided at the bottom of the preset list
panel (
All saved presets are listed in the Preset List workspace in alpha-numeric order. If the list
of presets is too long to display within the area, a scroll bar is on the right side of the pane.
NOTE: Multiple presets can be active, however, the last preset launched takes

Preset List Controls

A toolbar at the bottom of the Preset List workspace provides preset creation and
control (
New
Select New to create a preset. When selected, it clears a previously loaded preset from the
preset design area (see
Note: Preset names must not include spaces or non alphanumeric characters such as / \
Launch
Launch configures and connects devices included in the preset.
Click Launch to activate a preset:
1.
2.
Launch is also available by right-clicking on a selected preset in the preset list.
Stop
Stop clears all settings made in a preset when launched, including:
•
•
figure
), presets are saved (
3
).
5
precedence when connections conflict with other active presets.
). It is not possible to select multiple presets.
5
Preset Design Panel
*, % ! " £ $ % ^ & * ( )@~#?><. These characters are blocked from use. Underscore (_)
and hyphen (–) are permitted.
Select a preset from the list.
Click Launch to activate the preset.
Connections between encoders or players and decoders or recorders are removed.
An active recording or playback is stopped.
79, on the previous page) provides management
1
). Once defined in the Preset
2
) to the Preset List for use at a later
6
on page 100).
VNM EC 200 • Preset Manager 97