Recorder Directory And File Management; Directory Management Overview - Extron electronics VNM EC 200 User Manual

Recorder Directory and File Management

VN-Matrix recorders can be used as a source (player) or display (recorder). The following section
describes the recorder directory and file structure and rules to assist in their management.

Directory Management Overview

A recording can be made on single or multiple devices (recorders). A recording contains all files required
to recreate the original stream from an encoder in a set. The set can consist of audio, video, and data file
types. Each recording set is stored in a unique directory.
•
Each directory can hold only the files for a single recording.
•
Directories must have a unique name, duplicates are not allowed.
A new directory can be created in two ways. The same methods are used on both the single and
5 -channel devices.
NOTE: Directory names must not include spaces or non alphanumeric characters such as / \ *, %
! " £ $ % ^ & * ( )@~#?><. These characters are blocked from use. Underscore (_) and hyphen (–)
are permitted.
Create Directory – Directory browser method (preferred)
To create a new directory using the navigation tree:
1.
Create a preset with an encoder and recorder (see
2.
Select a recorder (channel) in the Preset Design workspace.
3.
Click anywhere inside the Directory field of the Device Attributes panel, then select the
drop-down box on the right hand side (see figure 89,
Figure 89.
4.
The Recording Browser dialog box opens (see figure 90).
Figure 90.
Device Attributes
Name VNR100:p
Directory
File
Launch Status Play
Select Directory Drop‑down Box
Time Sync Yes
Start Offset 00:00:00
Recording Browser (VNR100:r)
Stop Offset 00:00:00
1 1
File Length 00:00:09
GFChaseTst
Create Folder
Rec
Delete Folder
Rec-2013-02-20-12-11-43
Rec-2013-03-01-15-52-44
Rec_2013-30-18-10-36-50
lost+found
Recording Browser Window, Create Folder
Select the root folder (
1
The Create Folder dialog box opens (see figure 91).
Recorder Presets
).
1
2 2
Open
), <right-click> on the folder, then click Create Folder (
VNM EC 200 • Preset Manager
on page 122).
1 1
Close
).
2
110