Getdevices - Extron electronics VNM EC 200 User Manual

getdevices

The getdevices command returns attributes and values for all devices connected to the
VN-Matrix System Controller. Optional parameters can limit the attributes that are returned
or can filter which devices return attributes.
Command line structure
getdevices keys where order_by
Available parameters and arguments for this command:
Parameter
keys
where
order_by
Attributes for the command parameter argument (all are returned by default):
Attribute
controllerIp
curver
device_id
device_type
dstIp
Argument
Attribute
or
Attribute1,
Attribute2
Example:
keys="name,localIp0"
Attribute
=
<>
like 'so%'
like '%urce'
like '%our%'
and
or
Example:
where="type='source'"
Example:
where="type='source'
and source_
status='Active'"
Attribute:
ASC
DESC
Example:
order_by="localIp0
ASC"
Value
nnn.nnn.nnn.nnn
Example: 192.168.0.254
ver(major.minor.
build)
Example: ver5.2.0
Serial number:
channel
Example: 50001:2
Text string
Example: VNC 200 DVI-AD
nnn.nnn.nnn.nnn:nnnn
Example:
192.168.0.23:8000
VNM EC 200 • Reference Information
Description
Any attribute from the getdevices
attribute table. Comma separated list of
desired attributes.
Any attribute from the getdevices attribute
table.
Equals
Does not equal
Starts with string 'so'
Ends with string 'urce'
Contains string 'our'
Logical and
Logical or
Any attribute from the
getdevices
table.
Sort in ascending order.
Sort in descending order.
Description
IP address of the controller for this device.
Current firmware version of the device.
The unique serial number of the device,
followed by the channel number if
applicable (VNM Recorder and VNS 104).
Hardware type associated with the device.
Stream destination IP address and port
number.
attribute
205