Custom Source And Display Formats Overview - Extron electronics VNM EC 200 User Manual

Custom Source and Display Formats Overview

Custom source and display formats may be created when a specific input or output mode
is not supported in the standard list of resolutions supplied with a VN-Matrix device. Once
defined, the parameters for custom input and output modes are stored on the VNM EC 200.
This means that they are available for use on any VN-Matrix device that is managed by that
controller.
NOTE: Custom input modes can only be created for unsupported analog input types. It
Figure 125 shows the recommended system configuration used to create a new input or
output mode.
Figure 125.
is not possible to create custom input modes for digital inputs.
Display
Source
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
VN-Matrix Encoder
Recommended Setup for Creating Custom Input and Output Modes
Browser Based User
Control
Network
LAN-1
LAN-2
STATUS
VNM EC 200
VNM EC 200 • Format Editor Page
Display
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
VN-Matrix Decoder
134