Upgrade Page; Version Page - Extron electronics VNM EC 200 User Manual

Upgrade Page

The Upgrade page is used to update the firmware of the VNM EC 200.
•
•

Version Page

The Version page (see figure 19) details the versions of firmware running on various
components of the VN-Matrix system.
Figure 19.
The following fields are read-only (cannot be edited).
1
2
3
4
5
6
For information on updating the firmware of a single VNM EC 200, see
Firmware of a Single EC 200
For information on updating the firmware of dual (redundant) VNM EC 200s, see
Updating the Firmware of Dual (Redundant) EC 200s
1 1
2 2
3 3
4 4
5 5
6 6
Version Page
enterprise controller — This field displays the version of software that is running on
the VNM EC 200.
matrix controller — This field displays the version of firmware that is running on the
VNM EC 200.
heartbeat — This field displays the Heartbeat clustering software version that is
running on the VNM EC 200. The Heartbeat and Pacemaker software work together to
create a cluster.
pacemaker — This field displays the Pacemaker clustering software version that is
running on the VNM EC 200. The Heartbeat and Pacemaker software work together to
create a cluster.
drbd — This field displays the Distributed Redundant Block Device (DRBD
that is running on the VNM EC 200. DRBD is used to manage and sync a cluster of
VNM EC 200s.
linux kernel — This field displays the version of Linux that is running on the
VNM EC 200.
on page 184.
VNM EC 200 • Advanced Controller Configuration
Updating the
on page 184.
) version
®
27