Power Down Procedure - Extron electronics VNM EC 200 User Manual

5.
Actions: Info Connections
The Alarms, Configuration, and System Info pages, are used to configure and
operate the EC 200. The remaining tabs for the Devices, Preset Manager, and Format
Editor pages can configure and operate connected devices.

Power Down Procedure

To safely power down the VNM EC 200, press the recessed power button on the rear of the
controller (see
NOTE: Turning off the controller using the power button removes the main power, but
Click Login or press <Enter>. The Devices page opens (see figure 10). The
VNM EC 200 is now ready for configuration and operation.
NOTE: The Devices page displays only devices properly configured to operate
with the VNM EC 200 (see the user guides for individual devices for more
information). The VNM EC 200 must also be configured properly.
Configure Format Compression
Figure 10. Devices Page
Rear Panel Features
standby power is still supplied to the system.
VNM EC 200 • Controller Configuration and Operation
192.168.0.30 192.168.254.254
192.168.0.33 192.168.254.254
192.168.0.32 192.168.254.254
192.168.0.45 192.168.254.254
192.168.0.39 192.168.254.254
192.168.0.49 192.168.254.254
192.168.0.47 192.168.254.254
192.168.0.35 192.168.254.254
192.168.0.38 192.168.254.254
192.168.0.31 192.168.254.254
192.168.0.51 192.168.254.254
192.168.0.34 192.168.254.253
192.168.0.42 192.168.254.253
192.168.0.43 192.168.254.253
192.168.0.48 192.168.254.253
192.168.0.50 192.168.254.253
192.168.0.54 192.168.254.253
192.168.0.56 192.168.254.253
Peripherals License Upgrade Mode
on page 8). The power LED turns off.
Misc Group
12