Extron electronics VNM EC 200 User Manual page 71

Change Device Structure panel
NOTE: See Update a device license
key and checksum.
ATTENTION:
• DO NOT place information for a VNM EC 200 license into this menu. Doing so
causes the device to stop responding.
• Ne pas mettre d'informations pour une licence VNM contrôleur entreprise dans ce
menu. Si c'est le cas l'appareil risque d'arrêter de répondre.
• This menu is used for updating a device license only. See
and License Updates
• Ce menu est utilisé seulement pour mettre à jour la licence d'un appareil. Voir
Controller Firmware and License Updates
à jour de licence ) à la page 182 pour obtenir des informations sur les licences du
contrôleur VNM EC 200.
Structure — This field is used to update the structure key used by the device.
9
Checksum — This field is used to update the checksum used by the device.
¢
Update a device license
To obtain and install a new device license, follow the procedure below.
1. Contact the Extron S3 Sales and Technical Support Hotline and provide the following
information:
The device ID of the VN-Matrix device. This can be obtained from the back of the
•
device.
The order number of the VN-Matrix device.
•
2. The Extron S3 Sales and Technical Support Hotline provides a structure key and a
checksum.
Enter the structure key into the Structure field (see
•
previous).
Enter the checksum into the Checksum field (
•
3. Click Update License (
below for information on updating the structure
on page 182 for information about VNM EC 200 licenses.
(Firmware de contrôleur et Mises
¢
) to save the new license.
£
VNM EC 200 • Device Configuration and Control
Controller Firmware
figure 42 , on the
9
).
61