Table of Contents
Advertisement
Quill
Joint 3
Drive Belt
Figure 7-3.
6. Re-install the Joint 3 brake assembly, making sure the spacers are in place (see
Figure 7-4) and that the brake assembly fits correctly. You may have to move
Joint 3 up or down slightly to ensure the brake assembly meshes correctly with
the mechanism on Joint 3. Secure the brake assembly with the 4 screws.
7. Install the access cover using the 4 screws you removed earlier. Make sure the
cable running along the inside of the opening is not pinched when you install the
access cover.
Adept 550 Table-Top Robot User's Guide, Rev A
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Check Tension and Wear On J3 and J4 Drive Belts
Joint 3 Motor
Joint 4
Drive Belt
Location of Joint 3 and Joint 4 Drive Belts
Joint 4 Motor
Joint 3 Brake
Assembly
57
Advertisement
Table of Contents
