At&F Set All Current Parameters To Manufacturer Defaults; At+Gmi Request Manufacturer Identification; At+Gmm Request Model Identification; At+Gmr Request Revision Identification Of Software Release - SimCom SIM5350 Command Set

SIM5350 AT Command Set
3.21 AT&F Set all current parameters to manufacturer defaults
Description
This command is used to set all current parameters to the manufacturer defined profile.
NOTE: List of parameters reset to manufacturer default can be found in defined values, factory
default settings restorable with AT&F[<value>].
SIM PIN References
NO V.250
Syntax
Execution Command
AT&F[<value>]
Defined values
<value>
0 Set parameters to factory defaults.
Examples
AT&F
OK
3.22

AT+GMI Request Manufacturer Identification

Description
Same as AT+CGMI
3.23

AT+GMM Request Model Identification

Description
Same as AT+CGMM
3.24

AT+GMR Request Revision Identification of Software Release

Description
Same as AT+CGMR
SIM5350_ATC_V1.02
Responses
OK
25
6/9/2014