At+Csdh Show Text Mode Parameters - SimCom SIM5350 Command Set

SIM5350 AT Command Set
string with quotes), (<vp>
<pid>
GSM 03.40 TP-Protocol-Identifier in integer format (default 0).
<dcs>
GSM 03.38 SMS Data Coding Scheme (default 0), or Cell Broadcast Data Coding Scheme in
integer format depending on the command or result code.
Examples
AT+CSMP=17,23,64,244
OK
7.7

AT+CSDH Show text mode parameters

Description
This command is used to control whether detailed header information is shown in text mode result
codes.
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command
AT+CSDH=?
Read Command
AT+CSDH?
Write Command
AT+CSDH=<show>
Defined values
<show>
0 – do not show header values defined in commands
<tosca>, <fo>, <vp>,
AT+CMGL, AT+CMGR
for SMS-COMMANDs in
<length> or <data>
1 – show the values in result codes
SIM5350_ATC_V1.02
is in range 0... 255).
Responses
+CSDH: (list of supported <show>s)
OK
Responses
+CSDH: <show>
OK
Responses
OK
<pid> and <dcs>) nor <length>,
result codes for SMS-DELIVERs and SMS-SUBMITs in text mode;
AT+CMGR result code, do not show <pid>, <mn>, <da>, <toda>,
90
AT+CSCA and AT+CSMP
<toda> or <tooa> in +CMT,
6/9/2014
(<sca>,