Print data.
1. Start RasterLink.
2. Set the manual CD to your computer.
• If there is no sample file, create the sample file with the following procedure and go to step 3.
(1) Create "illustration data" and "cut line data".
• For details on how to create "illustration data" and "cut line data", refer to the RasterLink Refer-
ence guide "RasterLinkTools".
(2) Placing the "illustration data" on the print layer ([Print] attribute: ON) and the "cut line data" on the
cut layer ([Print] attribute: OFF).
3. From the [File] menu, select [Open].
• The [Select file name to print] screen is displayed.
4. Read the Sample file.
• If there is no sample file, use the data created in step 2.
(1) Select the following files on the [Select file name to print]
screen, and click [Open].
For Windows: "CD drive:\EN\English\
For Macintosh: "CD drive:\Mac_English\
No manual CD: Create the data in Step 2.
(2) The sample data is loaded.
• Sample data is created with RasterLinkTools.
5. Select the read data and click the [General Print] icon
the right side of the screen.
6. Add register marks and ID data.
The conditions under which ID cut is possible are as follows.
• Mark Shape: [Type 1
• Size of data: more than 70 mm in length and width
(1) Set the number of copies.
(2) Select a register mark shape.
ID Cut_Sample data\sample_mimaki.eps"
ID Cut_sample data\sample_mimaki.eps"
] or [Type 2
]
- 9 -
in the function icon list on