Erase Mode - Omron SYSMAC C200H-OV001 Operation Manual

ERASE Mode

3-5 ERASE Mode
Erasing Messages
To erase all messages
Select message number 00
with the MSG No. decrement
switch.
Push the ST/SP switch.
Set the mode selector to
ERA
Erase messages
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Messages and displayed error codes can be erased in ERA mode.
Start
Set the memory protect
switch to the OFF position.
Set the mode selector
switch to ERA mode.
To erase specified messages
Specify the message number
to be erased with the MSG No.
increment/decrement switch.
Push the ST/SP switch.
End
When the Voice Unit is ready, the PLAY and REC indicators are blinking at
0.5 second intervals.
ERA
Mode
selector
switch
Specify the number of the message to be erased on the MSG No. indicator
with the MSG No. increment/decrement switch.
Message numbers 00 through 60 can be specified.
If message number 00 is specified, all messages (01 through 60) are erased.
To erase error codes.
Push the ST/SP switch.
RUN
PLAY and REC indicators are
PLAY
blinking at 0.5 second inter-
REC
vals to indicate erasure stand-
ERR
by status.
OVF
Section 3-5
27