Omron SYSMAC C200H-OV001 Operation Manual page 59

ON-LINE Mode
PC Data Transfers
Program Data Transfers
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The messages stored in memory are retained even when the stop command
turns ON, and are played back when the command turns OFF.
Stop Command (word n bit 15)
Message no. 1 output
command (played
back twice at 1 sec-
ond intervals)
Message no. 2 output
command (played back
once at 2 second inter-
vals)
Stop command
(word n bit 15)
Message no. 1
playback
Message no. 2
playback
Message output in
progress flag (word
n+9 bit 04)
Develop a PC program like the one below when the Voice Unit is used in ON-
LINE mode:
2nd time Interrupted
1st
time
1 s
Section 3-8
1st
time
2 s
51